Device Security > Management Access > Web
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
119
Device Security > Management Access > Web
3.9 Web
With this dialog you specify settings for the graphical user interface.
Configuration
Buttons
Parameters Meaning
Web Interface
Session Timeout
[min]
Specifies the timeout in minutes. After the device has been inactive for this
time it ends the session for the user logged on.
Possible values:
0..160
(default setting
5
)
The value
0
deactivates the function, and the user remains logged on
when inactive.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
To Next Page
Loading...