Diagnostics > Report > Global
Diagnostics
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
463
Diagnostics > Report > Global
9.19 Global
The device allows you to log specific events using the following outputs:
on the console
on one or more syslog servers
on a CLI connection set up using SSH
In this dialog, you specify the required settings. By assigning the severity you
specify which events the device registers.
The dialog allows you to save a ZIP archive with system information on your
PC.
Console Logging
Parameters Meaning
Operation When the function is switched on, the device logs the events on the
console.
Possible values:
"On"
"Off" (default setting)
Severity Specifies the minimum severity for the events. The device logs events with
this severity and with more urgent severities.
The device outputs the messages on the V.24 interface.
Possible values:
emergency
alert
critical
error
warning
(default setting)
notice
informational
debug
To Next Page
Loading...