Hirschmann HiSecOS EAGLE30 - IP Access Restriction

Device Security > Management Access > IP Access Restriction
Device Security
116
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Device Security > Management Access > IP Access Restriction
3.8 IP Access Restriction
This dialog enables you to restrict the access to the management functions
of the device to specific IP address ranges and selected IP-based
applications.
 If the function is switched off, you can access the management functions
of the device from any IP address and via all applications.
 If the function is switched on, the access is restricted. You access the
management functions under the following conditions:
– At least one table entry is activated.
and
– You are accessing the device with a permitted application from a
permitted IP address range.
 Operation
Note: Before you enable the function, verify that at least one active entry
in the table allows you access. Otherwise, the connection to the device
terminates when you change the settings. To access the management
functions is possible solely using CLI through the V.24 interface of the
device.
Parameters Meaning
Operation If the function is on, the access to the management functions of the device
is restricted.
Possible values:
 "Off" (default setting)
 "On"
Access to the management functions of the device is restricted.