Device Security > Management Access > IP Access Restriction
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
117
Table
You have the option of defining up to 16 table entries and activating them
separately.
Parameters Meaning
Index Displays a sequential number to which the table entry relates.
The device automatically defines this number.
Possible values:
1..16
When you delete a table entry, this leaves a gap in the numbering. When
you create a new table entry, the device fills the first gap.
IP Address Range Specifies the IP address range for which you specify the access to the
management functions with this table entry.
Possible values:
Valid IPv4 address and netmask in CIDR notation
0.0.0.0/0
(default setting for newly created entries)
HTTP Activates/deactivates the HTTP access.
Possible values:
marked
(default setting)
Access is activated for the adjacent IP address range.
unmarked
Access is deactivated.
HTTPS Activates/deactivates the HTTPS access.
Possible values:
marked
(default setting)
Access is activated for the adjacent IP address range.
unmarked
Access is deactivated.
SNMP Activates/deactivates the SNMP access.
Possible values:
marked
(default setting)
Access is activated for the adjacent IP address range.
unmarked
Access is deactivated.
To Next Page
Loading...