Hirschmann HiSecOS EAGLE30 - Configuration Check

Diagnostics > System > Configuration Check
Diagnostics
446
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Diagnostics > System > Configuration Check
9.9 Configuration Check
The device allows you to compare the settings in the device with the settings
in its neighboring devices. For this purpose, the device uses the information
that it received from its neighboring devices through topology recognition
(LLDP).
The dialog lists the deviations detected, which affect the performance of the
communication between the device and the recognized neighboring devices.
You update the content of the table by clicking the "Reload" button. If the
table remains empty, the configuration check was successful and the
settings in device are compatible with the settings in the detected
neighboring devices.
 Summary
You will also find this information in the status bar above the menu.
Parameters Meaning
Number of Errors Displays the number of errors that the device detected during the
configuration check.
Number of Warnings Displays the number of warnings that the device detected during the
configuration check.
Amount of Information Displays the amount of information that the device detected during the
configuration check.