Hirschmann HiSecOS EAGLE30 - Tracking

Routing > L3-Redundancy > VRRP > Tracking
Routing
374
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Routing > L3-Redundancy > VRRP > Tracking
8.27 Tracking
VRRP tracking allows you to follow the operation of specific object and react
to a change in the object status. The function is periodically notified about the
tracked object and displays the changes in the table. The table displays the
object statuses as either
up , down or notReady .
 To enter a track object in the table, click the "Create" button.
 Table
Parameters Meaning
Port Displays the port number of the virtual router.
VRID Displays the virtual router ID for this virtual router.
Track Name Displays the name of the tracking object to which the virtual router is
linked.
If the result for a tracking object is negative, then the "VRRP" instance
reduces the priority of the virtual router. The tracking object is negative
for example, if the monitored interface is inactive or the monitored
router cannot be reached.
Possible values:
 Name of the tracking object, made up of "Type" and "Track ID".
 Logical trackers, which combine multiple trackers
 –
No tracking object selected.
You set up tracking objects in the
Routing > Tracking > Tracking
Configuration
dialog.
Decrement Specifies the value by which the VRRP instance reduces the priority
of the virtual router when the monitoring result is negative.
Possible values:
 1..253 (default setting: 20 )
Note: If in the
Routing > L3-Redundancy > VRRP > Configuration
dialog the value in the "Priority" column is
255 , then the virtual router
is the owner of the IP address. In this case the priority of the virtual
router remains unchanged.