Routing > NAT > Double NAT > Mapping
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
413
Routing > NAT > Double NAT > Mapping
8.42 Double NAT Mapping
In this dialog you assign the NAT rules to a router interface. To do this, click
the "Assign" button.
You create and edit the NAT rules in the
Routing > NAT > Double NAT >
Rule.
An overview of which NAT rule is assigned to which router interfaces you find
in the
Routing > NAT > Double NAT > Overview
dialog.
Table
Parameters Meaning
Port Displays the number of the router interface on which the device applies the
NAT rule.
Rule Index Displays the sequential number of the NAT rule, see the "Index" in the
Routing > NAT > Double NAT > Rule
dialog.
Rule Name Displays the name of the NAT rule, see the "Rule Name" field in the
Routing > NAT > Double NAT > Rule
dialog.
Direction Displays whether the device applies the rule to data packets received or
sent.
Possible values:
ingress
The device applies the rule to data packets received on the router
interface.
egress
The device applies the rule to data packets sent on the router
interface.
both
The device applies the rule to data packets received or sent on the
router interface.
You can change the value when you click the "Assign" button.
To Next Page
Loading...