Routing > NAT > Double NAT > Rule
Routing
412
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Set and back Transfers the changes to the volatile memory (
RAM
) of the device and goes
back to the previous dialog.
Back Displays the previous dialog again. Changes are lost.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Adds a new table entry.
Remove Removes the highlighted table entry.
Help Opens the online help.
To Next Page
Loading...