Hirschmann HiSecOS EAGLE30 - Snmpv1;V2 Community

Device Security > Management Access > SNMPv1/v2 Community
Device Security
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
125
Device Security > Management Access > SNMPv1/v2 Community
3.11 SNMPv1/v2 Community
With this dialog you specify the community name for SNMPv1/v2
applications.
Applications send requests via SNMPv1/v2 with a community name in the
SNMP data packet header. Depending on the community name, the
application gets read authorization or read and write authorization for the
device.
You activate the access to the device via SNMPv1/v2 in the
Device
Security > Management Access > Server
dialog.
 Table
Parameters Meaning
Community Displays the authorization for SNMPv1/v2 applications to the device:
 "Write"
For requests with the community name entered, the application
receives read and write authorization for the device.
 "Read"
For requests with the community name entered, the application
receives read authorization for the device.
Name Specifies the community name for the adjacent authorization.
Possible values:
 alphanumeric ASCII character string with 0..32 characters
private (default setting for read and write authorizations)
public (default setting for read authorization)