Hirschmann HiSecOS EAGLE30 - Signal Contact 1; Signal Contact

Diagnostics > Status Configuration > Signal Contact > Signal Contact 1
Diagnostics
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
435
Diagnostics > Status Configuration > Signal Contact > Signal Contact 1
9.5 Signal Contact 1 / Signal
Contact 2
In this dialog you specify the trigger conditions for the signal contact.
The signal contact gives you the following options:
 Monitoring the correct operation of the device.
 Signaling the device status of the device.
 Signaling the security status of the device.
 Controlling external devices by manually setting the signal contacts.
The dialog contains the following tabs:
 Global
 Port
 Status