Switching > QoS/Priority > Global
Switching
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
253
Switching > QoS/Priority > Global
6.5 Global
The device allows you to maintain access to the management functions,
even in situations with heavy utilization. In this dialog you specify the required
QoS/priority settings.
Configuration
Parameters Meaning
VLAN Priority for
Management
packets
Specifies the VLAN priority for sending management data packets.
Depending on the VLAN priority, the device assigns the data packet to a
specific traffic class and thus to a specific priority queue of the port.
Possible values:
0..7
(default setting:
0
)
In the
Switching > QoS/Priority > 802.1D/p Mapping
dialog, you assign
a traffic class to every VLAN priority.
IP DSCP Value for
Management
packets
Specifies the IP DSCP value for sending management data packets.
Depending on the IP DSCP value, the device assigns the data packet to
a specific traffic class and thus to a specific priority queue of the port.
Possible values:
0..63
(default setting:
0(be/cs0)
)
Some values in the list also have a DSCP keyword, for example
be/cs0
,
af11
or
ef
. These values are compatible with the IP precedence model.
Number of Queues
per Port
Displays the number of priority queues per port. You assign very priority
queue to a specific traffic class (traffic class according to IEEE 802.1D).
The device has 8 priority queues per port.
To Next Page
Loading...