EasyManua.ls Logo

Hirschmann HiSecOS EAGLE30 - Advanced Configuration

Hirschmann HiSecOS EAGLE30
532 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Virtual Private Network > Connections
Virtual Private Network
234
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Advanced Configuration
Parameters Meaning
General
Margintime [s] Specifies the time, in seconds, remaining before the connection or the
keying channel expires, after which the device attempts to negotiate a
replacement.
Possible values:
1..1800
(default setting:
540
)
The default setting is equal to 9 minutes. The maximum value is half an
hour.
Parameters Meaning
IKE/Key-Exchange
Version Specifies the version of the IKE protocol to use for the VPN connection.
Possible values:
auto
(default setting)
The VPN starts with protocol IKEv2 as the initiator and accepts
IKEv1/v2 as the responder.
ikev1
The VPN uses the IKE version 1 (ISAKMP) protocol.
ikev2
The VPN uses the IKE version 2 protocol.
Startup Specifies if the device starts this instance as a responder or initiator.
When you specify the local peer as the responder, and the remote peer
sends traffic to a specific selector, then the device attempts to establish the
connection as the responder. Establishing a connection as a responder
depends upon other settings for this connection. For example, if you specify
the "Remote Endpoint" as
any
, then this not possible to initiate the
connection.
Possible values:
initiator
When the instance starts as an initiator it begins an IKE with the
responder.
responder
If you specify that the instance starts as a responder, then it waits for
the initiator to start the IKE and parameter negotiation.

Table of Contents

Related product manuals