Device Security > Management Access > Server
Device Security
106
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
3.7.4 HTTPS
This tab allows you to enable/disable the HTTPS protocol for the web server
and specify the settings required for HTTPS.
The web server provides the graphical user interface via an encrypted HTTP
connection. The graphical user interface communicates with the device
based on SNMP via the encrypted HTTP connection and enables access to
the management functions.
A digital certificate is required for the encryption of the HTTP connection. The
device allows you to create this certificate yourself or to load an existing
certificate onto the device.
The device supports up to 10 simultaneous connections via HTTP or HTTPS.
Operation
Parameters Meaning
Operation Enables/disables the HTTPS protocol for the web server.
Possible values:
"Off"
The HTTPS protocol is disabled.
"On" (default setting)
The HTTPS protocol is enabled.
The management functions of the device are accessible through an
encrypted HTTPS connection.
You can start the web browser using HTTPS only if there is a
certificate on the device.
Note: When the HTTP protocol is disabled and you also disable HTTPS,
then the graphical user interface is unaccessible. To work with the
graphical user interface, enable the HTTP server via the Command Line
Interface.
To Next Page
Loading...