Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
129
4 Network Security
This menu allows you to specify settings which help to protect the network
against undesired or dangerous access.
The data packets go through the filter functions of the device in the following
sequence:
Figure 8: Processing sequence of the data packets in the device
The menu contains the following dialogs:
Network Security Overview
Packet Filter
Deep Packet Inspection
RADIUS
DoS
ACL
DoS
Switching Chip
Operating System
Destination Address Modification
1:1 NAT
Destination NAT
Double NAT
Ingress
Packet
Filter
Egress
Packet
Filter
Source Address Modification
Masquerading NAT
Double NAT
IP-based ACL
Network 1
MAC-based ACL
Policy Routing
Network 2
To Next Page
Loading...