Switching > QoS/Priority > 802.1D/p Mapping
Switching
256
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Switching > QoS/Priority > 802.1D/p Mapping
6.7 802.1D/p Mapping
The device transmits data packets with a VLAN tag according to the
contained QoS/priority information with a higher or lower priority.
In this dialog, you assign a traffic class to every VLAN priority. You assign´the
traffic classes to the priority queues of the ports.
Table
Buttons
Parameters Meaning
VLAN Priority Displays the VLAN priority.
Traffic class Displays the traffic class assigned to the VLAN priority.
Possible values:
0..7
0
assigned to the priority queue with the lowest priority.
7
assigned to the priority queue with the highest priority.
Note: Network management protocols and redundancy mechanisms use
the highest traffic class. Therefore, select another traffic class for
application data.
Button Meaning
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
To Next Page
Loading...