Hirschmann HiSecOS EAGLE30 - SHDSL;EFM Statistics; Port; Pme

WAN > SHDSL/EFM > Statistics
WAN
270
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
WAN > SHDSL/EFM > Statistics
7.3 SHDSL/EFM Statistics
This dialog displays information about the connection parameters.
– PAF (PME Aggregation Function) displays the parameters of the pairs of
SHDSL ports aggregated into a connection.
– PME (Physical Medium Entity) displays the parameters of the individual
pairs.
The dialog contains the following tabs:
 Port
 PME
7.3.1 Port
This tab displays the connection parameters of the SHDSL ports.
 Table
Parameters Meaning
Port Displays the number of the device port to which the table entry relates.
Fault Status Displays the possible cause for connection errors on the port. If the device
does not detect a connection error, the field remains empty.
Possible values:
 noPeer
No remote device accessible.
 peerPowerLoss
The power supply of the remote device has failed.
 pmeSubTypeMismatch
Contradictory operating modes are assigned to the pairs. See the WAN >
SHDSL/EFM > Configuration dialog, "Operation mode" field.
 lowRate
The bandwidth falls below the threshold specified in the
efmCuThreshLowRate MIB variable. Default setting: 192 kbit/s.