Hirschmann HiSecOS EAGLE30 - Operating Instructions

Graphical User Interface
26
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
0.0.1 Operating Instructions
 Updating the display
The graphical user interface is an SNMP-based application. Upon
request, the underlying JAVA applet loads the settings displayed in the
dialogs from the volatile memory of the device. If a dialog remains opened
for a longer time, the values in the device have possibly changed in the
meantime.
 To update the display in the dialog, click the "Reload" button. Unsaved
information in the dialog is lost.
 Saving the settings
 To copy changed settings to the volatile memory (
RAM ), click the "Set"
button.
 To keep the changed settings even after restarting the device, click the
"Save" button in the
Basic Settings > Load/Save dialog.
Note: Unintentional changes to the settings may cause the connection
between your PC and the device to be terminated. Before you change the
settings, enable the "Undo Modifications of Configuration" function in the
Basic Settings > Load/Save dialog. With this function, the device
restores the active configuration profile saved in the non-volatile memory
(NVM) if the connection is interrupted after the settings have been
changed. The device remains reachable.
 Sorting the table entries
The graphical user interface displays numerous settings in table form.
You have the option of sorting the table entries in ascending or
descending order.
 To sort the table entries in ascending order, click the header line of the
corresponding column.
 To sort the table entries in descending order, click again the header
line of the corresponding column.