Hirschmann HiSecOS EAGLE30 - ARP Static

Routing > ARP > Static
Routing
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
293
Routing > ARP > Static
8.8 ARP Static
This dialog allows you to add to the ARP table IP/MAC address assignments
that you have specified yourself.
 Table
Parameters Meaning
IP Address Displays the IP address that the device assigns to the adjacent MAC
address.
MAC Address Displays the MAC address that the device assigns to the adjacent IP
address.
Port Displays the router interface to which the device applies the IP/MAC
address assignment.
Possible values:
 <Router interface>
The device applies the IP/MAC address assignment to this router
interface.
 no port
The IP/MAC address assignment is not assigned to a router interface
at the moment.
Active Displays whether the IP/MAC address assignment is active or inactive.
Possible values:
 marked
The IP/MAC address assignment is active. The ARP table of the
device contains the IP/MAC address assignment as a static entry.
 unmarked (default setting)
The IP/MAC address assignment is inactive.