Hirschmann HiSecOS EAGLE30 - Port Configuration

Switching > QoS/Priority > Port Configuration
Switching
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
255
Switching > QoS/Priority > Port Configuration
6.6 Port Configuration
In this dialog, you specify the QoS/priority settings for each device port for
received data packets.
 Table
 Buttons
Parameters Meaning
Port Displays the number of the device port.
Port Priority Specifies the VLAN priority of the data packets that the port receives.
Possible values:
 0..7 (default setting: 0 )
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Help Opens the online help.