Hirschmann HiSecOS EAGLE30 - Wizard

Routing > Interfaces > Configuration
Routing
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
283
8.3.1 Wizard
This Wizard allows you to set up a VLAN-based router interface.
 Create or select VLAN
 To set up a router interface on the basis of a VLAN already set up,
highlight a VLAN in the table.
 To set up a router interface on the basis of a new VLAN, specify at the
bottom of the "VLAN ID" field the ID of the new VLAN.
 Setup VLAN
Parameters Meaning
VLAN ID Displays the ID of the VLANs set up in the device.
Name Displays the name of the VLANs set up in the device.
Parameters Meaning
VLAN ID Specifies the ID of a VLAN that the "Wizard" sets up for you.
Possible values:
 1..4042
Parameters Meaning
VLAN ID Displays the ID of the VLAN that you have marked or specified on the
"Create or select VLAN" page.
Name Specifies the name of the VLAN.
Possible values:
 alphanumeric ASCII character string with 1..32 characters
(
0x20..0x7E ) including space character
This setting overwrites the setting specified for the port in the
Switching >
VLAN > Configuration dialog.