Routing > Interfaces > Configuration
Routing
282
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
ICMP
Unreachables
Displays whether the sending of “ICMP Destination Unreachable”
messages is activated on the router interface.
Possible values:
marked
The router interface sends “ICMP Destination Unreachable” messages.
unmarked
The router interface does not send “ICMP Destination Unreachable”
messages.
ICMP Redirects Displays whether the sending of “ICMP Redirect” messages is activated on
the router interface.
Possible values:
marked
The router interface sends “ICMP Redirect” messages.
unmarked
The router interface does not send “ICMP Redirect” messages.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Remove Removes the highlighted table entry.
Wizard Opens the Wizard that assists you in setting up VLAN-based router
interfaces.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...