Device Security > Management Access > CLI
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
121
3.10.1 Global
This tab allows you to change the CLI prompt and to specify the automatic
closing of sessions through the V.24 interface when they have been inactive.
Configuration
Parameters Meaning
Login Prompt Specifies the character string that the device displays in the Command
Line Interface (CLI) at the start of every command line.
Possible values:
alphanumeric ASCII character string with 0..128 characters
(
0x20..0x7E
) including space characters
Wildcards
–
%d
date
–
%i
IP address
–
%m
MAC address
–
%p
product name
–
%t
time
Default setting:
(EAGLE)
Changes to this setting are immediately effective in the active CLI session.
V.24 Timeout [min] Specifies the time in minutes after which the device automatically closes
the session of a logged on user in the Command Line Interface via the
V.24 interface when it has been inactive.
Possible values:
0..160
(default setting:
5
)
The value
0
deactivates the function, and the user remains logged on
when inactive.
A change in the value takes effect the next time a user logs into the device.
For Telnet and SSH, you specify the timeout in the
Device Security >
Management Access
> Server
dialog.
To Next Page
Loading...