Time > NTP > Multicast Groups
Time
76
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Time > NTP > Multicast Groups
2.5 Multicast Groups
In this dialog you specify the broadcast and multicast addresses.
In broadcast mode, the NTP client of the device obtains the time information
from broadcast or multicast messages from the addresses specified here.
Table
Parameters Meaning
Index Displays a sequential number to which the table entry relates.
Possible values:
1..4
The device automatically assigns this number.
When you delete a table entry, this leaves a gap in the numbering. When
you create a new table entry, the device fills the first gap.
Address Specifies the IP address of the broadcast or multicast.
Possible values:
Valid IPv4 address (default setting:
0.0.0.0
)
Port Specifies the UDP Port on which the broadcast or multicast provides the
time information.
Possible values:
1..65535
(default setting:
123
)
Exception: Port
2222
is reserved for internal functions.
To Next Page
Loading...