Hirschmann HiSecOS EAGLE30 - Network Security Overview

Network Security > Overview
Network Security
130
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Network Security > Overview
4.1 Network Security Overview
This dialog displays the network security rules used in the device.
 Parameter
Parameters Meaning
Port/VLAN Specifies whether the device displays VLAN- and/or port-based rules.
Possible values:
 All (default setting)
The device displays the VLAN- and port-based rules specified by you.
 Port: <Port Number>
The device displays port-based rules for a specific port. This selection
is available to you if you specified one or more rules for this port.
 VLAN: <VLAN ID>
The device displays VLAN-based rules for a specific VLAN. This
selection is available to you if you specified one or more rules for this
VLAN.
ACL Displays the ACL rules in the overview.
You edit Access Control Lists in the
Network Security > ACL dialog.
Packet Filter Displays the Packet Filter rules in the overview.
Destination NAT Displays the destination NAT rules in the overview.
You edit Destination NAT rules in the
Routing > NAT > Destination NAT
dialog.
Double NAT Displays the double NAT rules in the overview.
You edit Double NAT rules in the
Routing > NAT > Double NAT dialog.
Masquerading NAT Displays the masquerading NAT rules in the overview.
You edit Masquerading NAT rules in the
Routing > NAT > IP
Masquerading
dialog.
1:1 NAT Displays the 1:1 NAT rules in the overview.
You edit 1:1 NAT rules in the
Routing > NAT > 1:1 NAT dialog.
All Marks the adjacent checkboxes. The device displays the related rules in
the overview.
None Unmarks the adjacent checkboxes. The device does not display any rules
in the overview.