Hirschmann HiSecOS EAGLE30 - DNS Client Global

Advanced > DNS > Client > Global
Advanced
476
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Advanced > DNS > Client > Global
10.3 DNS Client Global
In this dialog, you enable the DNS Client function.
 Operation
 Buttons
Parameters Meaning
Operation Enables/disables the DNS client function.
If you enable the function, the device responds to requests for resolving
hostnames in IP addresses.
Possible values:
 "On"
Enables the DNS client function on the device.
 "Off" (default setting)
Disables the DNS client function on the device.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Help Opens the online help.