Hirschmann HiSecOS EAGLE30 - Packet Filter Assignment

Network Security > Packet Filter > Assignment
Network Security
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
151
Network Security > Packet Filter > Assignment
4.6 Packet Filter Assignment
This dialog allows you to assign one or more packet filter rules to routing
interfaces of the device.
You set up routing interfaces in the
Routing > Interfaces > Configuration
dialog.
 Information
 Table
Parameters Meaning
Assignment Count Displays how many rules are active for the ports.
Uncommitted
Changes present
Specifies whether the packet filter rules used in the data stream differ from
the packet filter rules saved in the device.
Possible values:
 unmarked
The device applies the saved packet filter rules to the data stream.
 marked
At least one of the packet filter rules saved in the device contains
modified settings. By clicking the "Commit Changes" button, you apply
the packet filter rules to the data stream.
Parameters Meaning
Description Displays the name or description of the rule. You specify the description
in the Network Security > Packet Filter > Rule dialog.
Rule Index Displays the sequential number of the rule. You specify the index by
clicking on the "Assign" button.
Interface Displays the interface on which the device uses the rule. You specify the
interface by clicking on the "Assign" button. The device displays ports on
which you enable routing.