Basic Settings > System
Basic Settings
30
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Basic Settings > System
1.1 System
With this dialog you can display device properties and monitor individual
operating statuses.
Device Status
The fields in this frame display the device status and inform you about
alarms that have occurred. You specify the parameters that the device
monitors in the
Diagnostics > Status Configuration > Device Status
dialog.
Note: The device reports an alarm if you connect one power supply unit
exclusively for the supply voltage to a device with multiple ports. To avoid
this alarm, you deactivate the monitoring of the missing power supply
units in the
Diagnostics > Status Configuration > Device Status
dialog.
Parameters Meaning
Symbol Displays the device status.
Possible values:
The device status is OK. The monitored parameters have the
desired status.
An alarm has occurred. At least one monitored parameter differs
from the desired status.
Alarm Counter Displays the number of current alarms.
Alarm Reason Displays the cause of the alarm and the time at which the device triggered
the alarm. If the "Alarm Counter" displays more than
1
alarm, use the
arrow buttons to call up the other alarm states.
Possible values:
Cause of the event (Date and time in the format
Month, Day, Year
hh:mm:ss AM/PM
).
The device triggers an alarm if a monitored parameter differs from the
desired status. In the
Diagnostics > Status Configuration > Device
Status
dialog the parameters are sorted by priority: High priority at the top,
low priority at the bottom.
To Next Page
Loading...