Hirschmann HiSecOS EAGLE30 - Page 31

Basic Settings > System
Basic Settings
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
31
 Security Status
The fields in this frame display the security status and inform you about
alarms that have occurred. You specify the parameters that the device
monitors in the
Diagnostics > Status Configuration > Security
Status
dialog.
 Signal Contact Status
The fields in this frame display the security status and inform you about
alarms that have occurred. You specify the parameters that the device
monitors in the
Diagnostics > Status Configuration > Signal
Contact
dialog.
Parameters Meaning
Symbol Displays the security status.
Possible values:
The device status is OK. The monitored parameters have the
desired status.
An alarm has occurred. At least one monitored parameter differs
from the desired status.
Alarm Counter Displays the number of current alarms.
Alarm Reason Displays the cause of the alarm and the time at which the device triggered
the alarm. If the "Alarm Counter" displays more than
1 alarm, use the
arrow buttons to call up the other alarm states.
Possible values:
 Cause of the event (Date and time in the format Month, Day, Year
hh:mm:ss AM/PM
).
The device triggers an alarm if a monitored parameter differs from the
desired status. In the
Diagnostics > Status Configuration > Security
Status
dialog the parameters are sorted by priority: High priority at the top,
low priority at the bottom.
Parameters Meaning
Symbol Displays the security status.
Possible values:
The device status is OK. The monitored parameters have the
desired status.
An alarm has occurred. At least one monitored parameter differs
from the desired status.