Hirschmann HiSecOS EAGLE30 - Packet Filter Global

Network Security > Packet Filter > Global
Network Security
134
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Network Security > Packet Filter > Global
4.3 Packet Filter Global
With this dialog you can enter the global settings for the packet filter.
 Configuration
 Information
Parameters Meaning
Max. number of
allowed rules for L3
firewalling
Displays the maximum number of allowed firewall rules for data packets.
Default Policy Specifies how the firewall handles data packets if no rule applies.
Possible values:
 accept (default setting)
The device accepts incoming data packets.
 drop
The device discards incoming data packets.
 reject
The device discards incoming data packet and sends an ICMP Admin
Prohibited message to the sender.
Parameters Meaning
Uncommitted
Changes present
Specifies whether the packet filter rules used in the data stream differ from
the packet filter rules saved in the device.
Possible values:
 unmarked
The device applies the saved packet filter rules to the data stream.
 marked
At least one of the packet filter rules saved in the device contains
modified settings. By clicking the "Commit Changes" button, you apply
the packet filter rules to the data stream.