Hirschmann HiSecOS EAGLE30 - Tracking Configuration

Routing > Tracking > Configuration
Routing
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
351
Routing > Tracking > Configuration
8.20 Tracking Configuration
In this dialog, you set up the tracking objects.
 Table
Parameters Meaning
Type Specifies the type of the tracking object.
Possible values:
 interface
The device monitors the link status of its physical ports or of its link
aggregation, LRE or VLAN router interface.
 ping
The device monitors the route to a remote router or end device by
means of periodic ping requests.
 logical
The device monitors tracking objects logically linked to each other and
thus allows complex monitoring tasks.
Track ID Specifies the identification number of the tracking object.
Possible values:
 1..256
This range is available to every type ( interface , ping and logical ).
Track Name Displays the name of the traffic object made up of "Type" and "Track ID".
Active Activates/deactivates the monitoring of the tracking object.
Possible values:
 marked
Monitoring is active. The device monitors the tracking object.
 unmarked (default setting)
Monitoring is inactive.
Description Specifies the description.
Here you describe what the device uses the tracking object for.
Possible values:
 alphanumeric ASCII character string with 0..255 characters