Routing > Tracking > Configuration
Routing
352
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Status Displays the monitoring result of the tracking object.
Possible values:
up
The monitoring result is positive:
– The link status is active.
or
– The remote router or end device is reachable.
or
– The result of the logical link is TRUE.
down
The monitoring result is negative:
– The link status is inactive.
or
– The remote router or end device is not reachable.
or
– The result of the logical link is FALSE.
notReady
The monitoring of the tracking object is inactive. You activate the
monitoring in the "Active" field.
Number of Changes Displays the number of status changes since the tracking object has been
activated.
Last changed Displays the time of the last status change.
Send Change Trap Activates/deactivates the sending of an SNMP trap when someone
activates or deactivates the tracking object.
Possible values:
marked
The device sends an SNMP trap when someone activates or
deactivates the tracking object in the "Active" field.
unmarked
(default setting)
The device does not send a SNMP trap.
Port Specifies the interface to be monitored for tracking objects of the
interface
type.
Possible values:
<interface number>
Number of the physical ports or of the link aggregation, LRE or VLAN
router interface.
–
(No tracking object of the
interface
type)
Link Up Delay [s] Specifies the period in seconds after which the device evaluates the
monitoring result as positive. If the link has been active on the interface for
longer than the period specified here, the "Status" field displays the value
up
.
Possible values:
0..255
–
(No tracking object of the
interface
type)
Parameters Meaning
To Next Page
Loading...