Time
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
67
2Time
The device allows you to synchronize the system time in the device and in
the network with NTP (Network Time Protocol).
The device is equipped with a buffered hardware clock. This clock maintains
the correct time if the power supply fails or you disconnect the device from
the power supply. After the device is started, the current time is available to
you, e.g. for log entries.
The hardware clock bridges a power supply downtime of 3 hours. The
prerequisite is that the power supply of the device has been connected
continually for at least 5 minutes beforehand.
The menu contains the following dialogs:
Basic Settings
NTP
To Next Page
Loading...