WAN > SHDSL/EFM
WAN
266
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
WAN > SHDSL/EFM
7.1 SHDSL/EFM
Single-Pair Highspeed Digital Subscriber Line (SHDSL) enables data
transmission over copper pairs with symmetric upstream and downstream.
The device supports only the EFM interface of SHDSL (2BASE-TL). This
offers you the option of connecting 2 HiSecOS EAGLE20/30 devices over
existing telephone lines using Ethernet in full-duplex mode. Depending on
interference, line quality, and speed, the devices can be several kilometers
apart.
The device aggregates 2 pairs to a connection on the port if they are present
and correctly wired. This enables bandwidths according to IEEE 802.3-2008,
Clause 63 (Section 5), of up to 2 × 5696 MBit/s per port.
The menu contains the following dialogs:
SHDSL/EFM Configuration
SHDSL/EFM Statistics
To Next Page
Loading...