Routing > L3-Redundancy > VRRP > Statistics
Routing
372
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Routing > L3-Redundancy > VRRP > Statistics
8.26 VRRP Statistics
This dialog displays the numbers on counters that count events relevant to
the "VRRP" function.
Information
Table
Parameters Meaning
Checksum errors Displays the number of VRRP messages received with the wrong
checksum.
Version errors Displays the number of VRRP messages received with an unknown or
unsupported version number.
VRID errors Displays the number of VRRP messages received with an invalid
"VRID" for this virtual router.
Parameters Meaning
Port Displays the port number to which the entry relates.
VRID Displays the Virtual Router IDentifier.
Become master Displays the number of times that the device has taken the master
role. This entry assists with network analysis. When this number is low
your network is relatively stable.
Advertise received Displays the number of VRRP advertisements received.
Advertise Interval errors Displays the number of VRRP advertisements received by the router
outside the advertisement interval. The value allows you to determine
if the routers have the same advertise interval specified across the
virtual router instance.
Authentication failures Displays the number of VRRP advertisements received with
authentication errors.
IP TTL errors Displays the number of VRRP advertisements received with an IP TTL
not equal to
255
.
Priority Zero packets
received
Displays the number of VRRP advertisements received with priority
0
.
Priority Zero packets
sent
Displays the number of VRRP advertisements that the device sent
with priority
0
.
Invalid Type packets
received
Displays the number of VRRP advertisements received with an invalid
type.
To Next Page
Loading...