Routing > ARP > Current
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
291
Routing > ARP > Current
8.7 ARP Current
This dialog gives you the opportunity to view the ARP table and delete the
dynamically configured entries.
Table
Parameters Meaning
Port Displays the router interface on which the device has learned the IP/MAC
address assignment.
IP Address Displays the IP address of the device that responded to an ARP query on
this router interface.
MAC Address Displays the MAC address of the device that responded to an ARP query
on this router interface.
Last Updated Displays the time in seconds since the current settings of the entry were
registered in the ARP table.
Type Displays the way in which the ARP entry was set up.
Possible values:
dynamic
Dynamically configured entry.
If no traffic with the associated device takes place by the end of the
aging time, the device removes this entry from the ARP table.
You specify the aging time in the
Routing > ARP > ARP Global
dialog,
field "Aging Time [s]".
static
Statically configured entry.
The entry remains when you remove the dynamically configured
addresses from the ARP table using the "Reset ARP Table" button.
local
Identifies the IP/MAC address assignment of the router interface.
invalid
Invalid entry.
To Next Page
Loading...