Hirschmann HiSecOS EAGLE30 - Redistribution

Routing > OSPF > Global
Routing
308
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
8.10.3 Redistribution
Redistribution is helpful in cases where multiple network administrators
manage different departments, or in multi-vendor networks with multiple
protocols. OSPF redistribution allows you to convert route information such
as cost and distance to a destination from other protocols into OSPF.
To help prevent routes from double redistribution and thus preventing a
possible loop, use the "Tag" function to mark the routes redistributed from
other protocols into OSPF. Then on the other routers in the network, create
an "Access-List" to deny the tagged number.
The number of routes that the device learns through OSPF is limited to the
size of the routing table.
 Table
Parameters Meaning
Source Displays the source protocol, from which OSPF redistributes routes. This
object also acts as the identifier for the OSPF redistribution table entry.
Activating a row allows redistribution of routes from the specific source
protocol into OSPF.
Possible values:
 connected
The value indicates routes directly connected to the router.
 static
The value indicates routes that a network administrator specified in the
router.
Active Activates/deactivates route redistribution from the source protocol into
OSPF.
Possible values:
 marked
Redistribution of routes learned from the source protocol is active.
 unmarked (default setting)
OSPF route redistribution is inactive.
Metric Specifies the default metric used for redistributing a route from the source
protocol into OSPF.
Possible values:
 1..16777214 (default setting: 0 )