Basic Settings > System
Basic Settings
32
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
System Data
The fields in this frame display operating data and information on the
location of the device.
Alarm Counter Displays the number of current alarms.
Alarm Reason Displays the cause of the alarm and the time at which the device triggered
the alarm. If the "Alarm Counter" displays more than
1
alarm, use the
arrow buttons to call up the other alarm states.
Possible values:
Cause of the event (Date and time in the format
Month, Day, Year
hh:mm:ss AM/PM
).
The device triggers an alarm if a monitored parameter differs from the
desired status. In the
Diagnostics > Status Configuration > Signal
Contact
dialog the parameters are sorted by priority: High priority at the
top, low priority at the bottom.
Parameters Meaning
Name Specifies the device name.
Possible values:
alphanumeric ASCII character string with 0..255 characters
Location Specifies the location of the device.
Possible values:
alphanumeric ASCII character string with 0..255 characters
Contact Specifies the contact person for this device.
Possible values:
alphanumeric ASCII character string with 0..255 characters
Device Type Displays the product name of the device.
Power Supply Displays the status of the power supply unit on the relevant voltage
supply connection.
Possible values:
present
not present
defective
Parameters Meaning
To Next Page
Loading...