Basic Settings > System
Basic Settings
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
33
Uptime Displays the time that has elapsed since this device was last
restarted.
Possible values:
Time in the format
day(s), hh:mm:ss
Temperature (°C) The middle field displays the current temperature in the device in
°C.
This field specifies the lower temperature threshold in °C.
If the temperature in the device falls below this value, the
device generates an alarm.
This field specifies the upper temperature threshold in °C.
If the temperature in the device exceeds this value, the
device generates an alarm.
Possible values:
-99..99
(integer)
You activate the monitoring of the temperature thresholds in the
Diagnostics > Status Configuration > Device Status
dialog.
The “Installation” user manual contains detailed information about
setting the temperature thresholds.
Parameters Meaning
To Next Page
Loading...