Basic Settings > System
Basic Settings
34
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Device View
The image in this frame displays a simplified version of the structure of the
device.
The image also displays the states of the device status LEDs and the
ports at the time of the last update.
The following symbols represent the status of the individual ports. In some
situations, these symbols interfere with one another. If you position the
mouse pointer over the port icon, a bubble help displays a detailed
description of the port state.
Criterion Symbol
Bandwidth of the
device port
10 Mbit/s
Port activated, connection okay, full-duplex mode
100 Mbit/s
Port activated, connection okay, full-duplex mode
1000 Mbit/s
Port activated, connection okay, full-duplex mode
Operating state Half-duplex mode activated
See the
Basic Settings > Port
dialog, "Configuration" tab,
"Automatic Configuration" checkbox, "Manual Configuration"
field and "Manual Cable Crossing (Auto. Conf. off)" field.
Autonegotiation activated
See the
Basic Settings > Port
dialog, "Configuration" tab,
"Automatic Configuration" checkbox.
AdminLink Port is deactivated, connection okay
Port is deactivated, no connection set up
See the
Basic Settings > Port
dialog, "Configuration" tab,
"Port on" checkbox, and "Link/ Current Settings" field.
To Next Page
Loading...