Basic Settings > System
Basic Settings
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
35
Reloading Data in
The graphical user interface automatically updates the display of the
dialog every 100 seconds. In the process, it updates the fields and
symbols with the values that are saved in the volatile memory (
RAM
) of the
device. At the bottom left of the dialog, you will find the time of the next
update.
Figure 7: Time to next Reload
Note: The graphical user interface uses this function to update the display
in the
Basic Settings > System
dialog.
Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Help Opens the online help.
To Next Page
Loading...