Hirschmann HiSecOS EAGLE30 - VLAN Configuration

Switching > VLAN > Configuration
Switching
260
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
Switching > VLAN > Configuration
6.10 VLAN Configuration
In this dialog, you manage the VLANs. To set up a VLAN, create a further row
in the table. There you specify for each device port if it transmits data packets
of the respective VLAN and if the data packets contain a VLAN tag.
You distinguish between the following VLANs:
 The user sets up static VLANs.
 The device sets up dynamic VLANs automatically and removes them if
the prerequisites cease to apply.
For the following functions the device creates dynamic VLANs:
– "Routing": The device creates a VLAN for every router interface.
 Table
Parameters Meaning
VLAN ID ID of the VLAN.
The device supports up to 64 VLANs simultaneously set up.
Possible values:
 1..4042
Status Displays how the VLAN is set up.
Possible values:
 other
VLAN 1
 permanent
VLAN set up by the user.
VLANs with this setting remain set up after a restart, if you save the
changes in the non-volatile memory.
Creation time Displays the time of VLAN creation.
The field displays the time stamp for the operating time (system uptime).