Routing > L3-Redundancy > VRRP > Configuration
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
361
Routing > L3-Redundancy > VRRP > Configuration
8.25 VRRP Configuration
With this dialog, you enter general settings and settings for each port for
VRRP.
The function allows you to configure the following parameters:
up to 8 virtual routers
Operation
Information + Configuration
Parameters Meaning
Operation When you enable the function, the VRRP redundancy is active globally on
the device.
Possible values:
"Off" (default setting)
The "VRRP" function is disabled.
"On"
The "VRRP" function is enabled.
Parameters Meaning
Version Specifies the VRRP version.
To Next Page
Loading...