Hirschmann HiSecOS EAGLE30 - Page 362

Routing > L3-Redundancy > VRRP > Configuration
Routing
362
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Table
Send VRRP Master
Trap
Activates/deactivates sending an SNMP trap when the device takes over
the VRRP master function.
Possible values:
 marked
The device sends an SNMP trap when it takes over the VRRP master
function.
 unmarked (default setting)
The sending of SNMP traps is deactivated.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps) dialog and
specify at least 1 SNMP manager.
Send VRRP
Authentication
Failure Trap
Activates/deactivates sending an SNMP trap when the device receives a
VRRP packet including authentication information. In accordance with
RFC 3768 and RFC 5798 the device supports only VRRP packets without
authentication information.
Possible values:
 marked
The device sends an SNMP trap when it receives a VRRP packet
including authentication information.
 unmarked (default setting)
The sending of SNMP traps is deactivated.
The prerequisite for sending SNMP traps is that you enable the function in
the
Diagnostics > Status Configuration > Alarms (Traps) dialog and
specify at least 1 SNMP manager.
Parameters Meaning
Port Displays the port number to which the table entry relates.
VRID Displays the Virtual Router IDentifier.
Active Activates/deactivates the VRRP instance specified in this row.
Possible values:
 unmarked (default setting)
The "VRRP" instance is inactive.
 marked
The "VRRP" instance is active.
Parameters Meaning