Routing > Tracking > Configuration
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
353
Link Down Delay [s] Specifies the period in seconds after which the device evaluates the
monitoring result as negative. If the link has been inactive on the interface
for longer than the period specified here, the "Status" field displays the
value
down
.
Possible values:
0..255
–
(No tracking object of the
interface
type)
Link aggregation, LRE and VLAN router interfaces have a negative
monitoring result if the link to all the aggregated ports is interrupted.
A VLAN router interface has a negative monitoring result if the link to all
the physical ports and the link aggregation interfaces that are members of
the VLAN is interrupted.
Ping Port Specifies the router interface for tracking objects of the
ping
type via
which the device sends the ping request packets.
Possible values:
<interface number>
Number of the router interface.
NoName
No router interface assigned.
–
(No tracking object of the
ping
type)
IP Address Specifies the IP address of the remote router or end device to be
monitored.
Possible values:
Valid IPv4 address
–
(No tracking object of the
ping
type)
Ping Interval [ms] Specifies the interval in milliseconds at which the device periodically
sends ping request packets.
Possible values:
100..20000
(default setting:
1000
)
If you specify a value <
1000
, you can set up a maximum of 16 tracking
objects of the
ping
type.
–
(No tracking object of the
ping
type)
Ping Replies to lose Specifies the number of missed responses from the device after which the
device evaluates the monitoring result as negative. If the device does not
receive a response to its sent ping request packets for the number of times
specified here in a row, the "Status" field displays the value
down
.
Possible values:
1..10
(default setting:
3
)
–
(No tracking object of the
ping
type)
Ping Replies to
receive
Specifies the number of received responses from the device after which
the device evaluates the monitoring result as positive. If the device
receives a response to its sent ping request packets for the number of
times specified here in a row, the "Status" field displays the value
up
.
Possible values:
1..10
(default setting:
2
)
–
(No tracking object of the
ping
type)
Parameters Meaning
To Next Page
Loading...