Network Security > Packet Filter > Global
Network Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
135
Buttons
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Commit Changes Applies the rules saved in the device to the data stream.
In the process, the device also removes the state information from the
packet filter. This includes potential DCE RPC information of the OPC
enforcer. In the process, the device interrupts open communication
connections.
Note: While the device is activating the saved rules, the establishment of
any new communication connections is impossible.
Help Opens the online help.
To Next Page
Loading...