Hirschmann HiSecOS EAGLE30 - Page 269

WAN > SHDSL/EFM > Configuration
WAN
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
269
 Buttons
8 3072 3072 14.5 Europe
(Annex B sec. B.4.1)
32-TCPAM Standard
9 2048 2048 14.5 Europe
(Annex B sec. B.4.1)
16-TCPAM Standard
10 1024 1024 13.5 Europe
(Annex B sec. B.4.1)
16-TCPAM Standard
11 704 704 13.5 Europe
(Annex B sec. B.4.1)
16-TCPAM Standard
12 512 512 13.5 Europe
(Annex B sec. B.4.1)
16-TCPAM Standard
13 512 5696 0 North America
(Annex A sec. A.4.1)
0Custom
14 512 5696 0 Europe
(Annex B sec. B.4.1)
0Custom
15 192 192 0 North America
(Annex A sec. A.4.1)
16-TCPAM Custom
16 256 256 0 North America
(Annex A sec. A.4.1)
16-TCPAM Custom
17 192 512 0 North America
(Annex A sec. A.4.1)
16-TCPAM Custom
18 192 192 0 Europe
(Annex B sec. B.4.1)
16-TCPAM Custom
19 256 256 0 Europe
(Annex B sec. B.4.1)
16-TCPAM Custom
20 192 512 0 Europe
(Annex B sec. B.4.1)
16-TCPAM Custom
Button Meaning
Set Transfers the changes to the volatile memory (
RAM ) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
 Open the
Basic Settings > Load/Save dialog.
 In the table, highlight the desired configuration profile.
 If in the "Selected" column the checkbox is
unmarked , click the
"Select" button.
 Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM ) of the device.
Help Opens the online help.
Profile Min data
rate (kbit/s)
Max data
rate (kbit/s)
Power
(dBm)
Region Constellation Standard/
Custom
Table 5: Profiles with settings (cont.)