Device Security > Management Access > Server
Device Security
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
107
Configuration
Fingerprint
The fingerprint is an easily verified hexadecimal number sequence that
uniquely identifies the digital certificate of the HTTPS server.
After importing a new digital certificate, the device displays the current
fingerprint until you restart the server.
Parameters Meaning
TCP Port Specifies the number of the TCP port on which the web server receives
HTTPS requests from clients.
Possible values:
1..65535
(default setting:
443
)
Exception: Port
2222
is reserved for internal functions.
To apply the changes, disable the server and then enable it again. In the
process, the device terminates open connections to the server.
Parameters Meaning
Fingerprint Type Specifies which fingerprint the "Fingerprint" field displays.
Possible values:
sha1
The "Fingerprint" field displays the SHA1 fingerprint of the certificate.
sha256
The "Fingerprint" field displays the SHA256 fingerprint of the
certificate.
Fingerprint Number sequence of the digital certificate used by the server.
When you change the settings in the "Fingerprint Type" field, click
afterwards the "Set" and "Reload" buttons to update the display.
To Next Page
Loading...