Routing > L3-Redundancy > VRRP > Tracking
Routing
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
375
Buttons
Status Displays the monitoring result of the tracking object.
Possible values:
notReady
The tracking object is not operating.
up
The monitoring result is positive:
– The link status is active.
or
– The remote router or end device is reachable.
down
The monitoring result is negative:
– The link status is inactive.
or
– The remote router or end device is not reachable.
A combination of the
up
and
down
trackers.
Active Displays whether the monitoring of the tracking object is active or
inactive.
Possible values:
active
The monitoring of the tracking object is active.
notReady
The monitoring of the tracking object is inactive. You activate the
monitoring in the
Routing > Tracking > Tracking Configuration
dialog, "Active" field.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Opens the "Create" dialog to add a new entry to the table.
In the "Port" – "VRID" field you specify the interface and router ID of a
virtual router that has been set up.
In the "Track Name" field you specify the tracking object with which the
device links the virtual router.
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...