Device Security > Management Access > IP Access Restriction
Device Security
118
RM GUI HiSecOS EAGLE20/30
Release
3.0
09/2015
Buttons
SSH Activates/deactivates the SSH access.
Possible values:
marked
(default setting)
Access is activated for the adjacent IP address range.
unmarked
Access is deactivated.
Active Activates/deactivates the table entry.
Possible values:
marked
(default setting)
Table entry is activated. The device restricts access to its
management functions to the adjacent IP address range and the
selected IP-based applications.
unmarked
Table entry is deactivated.
Button Meaning
Set Transfers the changes to the volatile memory (
RAM
) of the device and
applies them to the device. To save the changes in the non-volatile
memory, proceed as follows:
Open the
Basic Settings > Load/Save
dialog.
In the table, highlight the desired configuration profile.
If in the "Selected" column the checkbox is
unmarked
, click the
"Select" button.
Click the "Save" button.
Reload Updates the fields with the values that are saved in the volatile memory
(
RAM
) of the device.
Create Adds a new table entry.
Remove Removes the highlighted table entry.
Help Opens the online help.
Parameters Meaning
To Next Page
Loading...