Hirschmann HiSecOS EAGLE30 - Page 114

Device Security > Management Access > Server
Device Security
114
RM GUI HiSecOS EAGLE20/30
Release 3.0 09/2015
 Key Import
Parameters Meaning
URL Specifies the path and file name of your own DSA/RSA key (host key).
The device accepts the DSA/RSA key if it has the following key length:
 2048 bit (RSA)
 1024 bit (DSA)
The device gives you the following options for copying the key to the
device:
 Import from the PC
If the key is on your PC or on a network drive, click the " … " button
and select the file that contains the key (host key).
You also have the option of transferring the key from your PC to the
device through SFTP or SCP:
 On your PC, open an SFTP or SCP client, for example WinSCP.
 Use the SFTP or SCP client to open a connection to the device.
 Transfer the file that contains the key to the directory
/upload/ssh-key on the device.
When the file transfer is complete, the device starts installing the
key. If the installation was successful, the device creates an
ok file
in directory
/upload/ssh-key and deletes the file that contains
the key.
 To get the server to use this key, you restart the server.
 Import from an SCP or SFTP server
If the key is on an SCP or SFTP server, you enter the URL for the file
in the following form:
–
scp://
or
sftp://<IP address>/<path>/<file name>
When you click the "Import" button, the device displays the
"Authentication" window. There you enter "Username" and
"Password", to login to the server.
–
scp:// or sftp://<user name>:<password>@<IP
address>/<path>/<file name>
… Displays the "Open" dialog. Here you select the key to be copied if the file
is located on your PC or on a network drive.
Import Copies the key (host key) specified in the "URL" field to the device.
To get the server to use this key, click the "Set" button and restart the
server.